PowersportsTV.com Forum  

Return to PowersportsTV.com



Go Back   PowersportsTV.com Forum > ATV - General
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1 (permalink)  
Old 04-16-2008, 12:40 PM
jon_r_mc jon_r_mc is offline
Junior Member
 
Join Date: Apr 2008
Posts: 2
Default on ATV's when you start the engine and it dosent start, what screws on the carburator should I adjust?

I've gotten it start and run but whenever I attampt to idle, the engine just dies. The engine is very difficult to start as well.
Reply With Quote
  #2 (permalink)  
Old 04-16-2008, 12:41 PM
daddyporky@verizon.net daddyporky@verizon.net is offline
Junior Member
 
Join Date: Apr 2008
Posts: 8
Default

this engine is controlled ** a engine control module... to do this correctly you need to take the car to a diagnostic center to get a read out.. one of you emission controls like a oxygen sensor or mixture sensor could have failed.. this engine is not like motors of the past.. all injection and carburator mixturs depent on the water content of the air outside temperature altitude.. above sea level etc.. a diagnostic will cost about 90 and the sensors are aditional.. if you get a read out ask the person to show you where the part is .. get a read out from the computer to show the part number.. purchase this and put it in yourself.. if the vechicle is more than ten years old they dont have parts.. so good luck.. ok gilermo.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 11:39 AM.


Powered by vBulletin Version 3.6.5
© 2005-2008 Powersports TV.com - All Rights Reserved


SEO by vBSEO 3.0.0 RC8