Seadoo Gsx 1998 Magneto Problems! HELP?

[Dave I]

OK so it it all started with blowing a 15A fuse...and then i did more research and checked everything people said to...and thought i fixed it so i took it out and was dead on water again so i took the magneto cover off ( was hell to get to) and found some small pieces of metel in there that might of been grounding it out...so i took it out shortly after and it was fineee but then blew a 15A fuse again...and i knew to take lots of fuses on water just in case so i replaced it and sometimes i would get a little ways and then it would blow...so i took it home checked grounds and what not and took it out again...well this time i used all my fuese on the water because right when i would put it in it would blow either the front MPEM 15 or the back 15 ** the silnoid... I took it home and unplugged the magneto wireing harness from the magneto case and then it stopped blowing fuses....so i assume it got grounded out agaiN? im kinda pissed because i just opened it up and cleaned it HELP

[zaveric]

Join Date: Sep 2007
Location: Peru, In
Water Crafts : 1996 seadoo hx 1998 seadoo xp limited
Posts: 32
Vts, Maybe Mpem Trouble....help!!!!!!

--------------------------------------------------------------------------------

I Burned Up My Vts Module And Got A New One.. Pluged It In And It Also Burned Up Instantly. Also The Mpem Started Smoking As Well. I Immediately Unplugged The Vts But It Was Too Late. It Starts And Runs But The Guages Dont Work. I Know I Smoked The Mpem But Im Afraid To Pay The $600 To Buy A New One Plug Everything In And Have It Burn Up Too. I Checked All The Wires And Cant See Any Shorts So What Else Could It Be Or Was It Maybe A Bad M-pem To Begin With????? Help